Skip to content

Home & everyday United Kingdom Recall of product from end users

Apeks XL4, XL4+ and Ocea Regulator Second Stages recall

Apeks XL4, XL4+ and Ocea second-stage scuba regulators (Apeks-branded), with serial numbers between 250402212 and 260402893 and manufactured April 2025 to April 2026, are affected. A manufacturing defect in the second-stage spindle assembly can restrict breathing-gas flow at depths exceeding 45 metres, posing a risk of asphyxiation; owners should stop using affected units and return them to their place of purchase or an authorised Apeks service centre for free inspection and repair.

What's being recalled

Product Recall for Apeks XL4, XL4+ and Ocea Regulators presenting a serious risk of asphyxiation.

Type: Personal protective equipment (PPE) - Environmental Respiratory Protection - Non-Powered

Brand: Apeks

Models: XL4, XL4+ and Ocea

Affected serial number range: Between 250402212 and 260402893

Manufacturing period of affected products: April 2025 to April 2026

Country of Origin: United Kingdom

Product Description: Apeks-branded scuba diving breathing devices.

How to identify it

PSD case number: 2607-0132

Notified by: Local Authority Trading Standards

The hazard

The product presents a risk of asphyxiation as a manufacturing defect in the second-stage spindle assembly can restrict the flow of breathing gas at depths exceeding 45 metres. The regulator may not deliver sufficient breathing gas when required, posing a risk of inadequate air supply to the diver at depth.

The products do not meet the requirements of Regulation (EU) 2016/425 on Personal Protective Equipment.

What to do

The affected products have been recalled from end users.

Owners are advised to stop using the regulator immediately if it falls within the affected serial number range and return it to their place of purchase or an authorised Apeks service centre. You can find your nearest authorised Apeks service centre using the store locater: https://uk.apeksdiving.com/pages/store-locator.

Affected regulators will be inspected and, if necessary, repaired free of charge by qualified technicians using approved Apeks replacement components. There is no charge for the inspection, repair or shipping.

For further details, please access the Apeks recall page at the following link: Product Safety Recall: Apeks XL4, XL4+ and OCEA Second Stage

The official notice

This page is a summary of the notice published by Office for Product Safety and Standards, collected from Office for Product Safety and Standards. Check the original before you act on it.

Read the official notice (opens in a new tab)

A little guidance

All guides

Search by name, description or tag. Press Enter to see every match.