United KingdomThe Easee One EV Charger Backplate (model BP-AP-1/s01-01) sold in the UK between late September 2025 and 3 February 2026 is affected; the PME terminal on some backplates is incorrectly labelled “L3”, identifiable by that mislabel. The incorrect labelling can cause the PME conductor to be connected to the standard PE terminal and bypass the charger’s PEN fault detection and automatic disconnection; Easee has a modification programme—charging may be paused for confirmed miswired units and corrective actions include inspection, backplate replacement and verification by a qualified electrician.
What's being recalled
Product Safety Report for Easee One EV Charger Backplate BP-AP-1/s01-01.
Type: Electrical appliances and equipment - Electric Vehicle Supply Equipment (EVSE)
Brand: Easee
Model: BP-AP-1/s01-01
Country of Origin: Norway
Product Description: The Easee One Backplate (BP-AP-1/s01-01) is a wall-mounted wiring base for the Easee One EV charger. It provides the electrical termination interface where the supply cables are connected. Affected units were placed on the UK market during a limited period between late September 2025 and 3 February 2026.
How to identify it
PSD notification number: 2604-0019
Notified by: Office for Product Safety and Standards
The hazard
The affected units have been fitted with an incorrect three‑phase terminal label. Specifically, the terminal that should be clearly marked as “PME” (Protective Multiple Earthing) is incorrectly labelled as “L3”, which may mislead installers during installation. This incorrect labelling could cause an electrician to connect the PME conductor to the standard PE terminal instead of the dedicated PME terminal, potentially bypassing the charger’s built‑in PEN fault detection and automatic disconnection function required for UK PME installations.
What to do
Modification programme.
Easee have identified affected products using serial number traceability and installer records. Where a mislabelled unit is confirmed to be incorrectly wired and without external PEN protection, charging is temporarily paused until remediation is completed. Where required, corrective actions include inspection, replacement of the backplate and verification by a qualified electrician.
The official notice
This page is a summary of the notice published by Office for Product Safety and Standards, collected from Office for Product Safety and Standards. Check the original before you act on it.
Read the official notice (opens in a new tab)